Geometric Bet Sizing Calculator
How big should you bet to get all the money in by the river? Enter the pot, the effective stack and the streets left. You get the one bet size, as a % of the pot, that gets stacks in exactly, with the amount to bet on every street, the stack left behind, and what each bet asks of your opponent. Then check any line of your own to see where it leaves you.
Geometric bet size
Use dollars, chips or big blinds. The effective stack is the smallest stack among the players in the hand, not counting what is already in the pot.
Check your own line
Uses the pot, stack and players above. Enter the bet you plan on each street as a % of the pot.
The geometric bet sizing formula
If you bet a fraction f of the pot and get called heads-up, the pot grows by 2f. After n calls the pot is pot × (1 + 2f)n, and that has to equal the starting pot plus both stacks. Solve for f:
f = ((1 + 2 × SPR)1/n − 1) ÷ 2, where SPR = effective stack ÷ pot and n = streets left.
With more players, every caller adds a bet to the pot, so use (callers + 1) in place of 2: f = ((1 + (c+1) × SPR)1/n − 1) ÷ (c+1). Example: SPR 13 over three streets gives (271/3 − 1) ÷ 2 = (3 − 1) ÷ 2 = 100%. Three pot-sized bets: $10 → $30 → $90, all in.
Geometric bet sizing chart (heads-up)
Bet this % of the pot on every street to get the effective stack in over 1, 2 or 3 streets.
| SPR | 1 street | 2 streets | 3 streets |
|---|---|---|---|
| 0.5 | 50% | 21% | 13% |
| 1 | 100% | 37% | 22% |
| 1.5 | 150% | 50% | 29% |
| 2 | 200% | 62% | 35% |
| 3 | 300% | 82% | 46% |
| 4 | 400% | 100% | 54% |
| 5 | 500% | 116% | 61% |
| 6 | 600% | 130% | 68% |
| 8 | 800% | 156% | 79% |
| 10 | 1000% | 179% | 88% |
| 13 | 1300% | 210% | 100% |
| 15 | 1500% | 228% | 107% |
| 20 | 2000% | 270% | 122% |
| 25 | 2500% | 307% | 135% |
| 30 | 3000% | 341% | 147% |
Two anchors worth remembering: at SPR 4 two pot-sized bets get it in, and at SPR 13 three do. Below SPR 4 even a three-street plan uses bets under half the pot. Above SPR 13 a normal pot-sized line leaves money behind on the river.
Example: a single-raised pot at $1/$2
$200 stacks. You open to $6 and the big blind calls. The pot is $13 and you have $194 behind: SPR 14.9. You flop a set and want stacks in by the river. Geometric sizing says 106.8% of the pot every street:
| Street | Pot | Bet | Behind after the call | Opponent’s MDF |
|---|---|---|---|---|
| Flop | $13 | $13.89 | $180.11 | 48% |
| Turn | $40.77 | $43.55 | $136.57 | 48% |
| River | $127.86 | $136.57 | $0 | 48% |
Even three pot-sized bets come up short here: you need just over the pot each street. Plan for it on the flop, because a common 50%-then-50% line at SPR 13 leaves 2.9× the pot behind on the river, which is why so many sets only win half a stack.
Example: a 100 bb 3-bet pot
Someone opens, you 3-bet to 9 bb in position, they call and the blinds fold. The pot is 19.5 bb with 91 bb behind (SPR 4.7). Over three streets the geometric size is 59%; over two streets it is 111% (21.6 bb on the turn, then 69.4 bb on the river). That is why small c-bets work so well in 3-bet pots: after a one-third-pot flop bet is called, two bets of 74% on the turn and river still get it all in. More in how to play 3-bet pots.
Multiway pots need smaller bets
Each caller adds a full bet to the pot, so the pot grows faster and each bet can be smaller. With a pot of 19 and 194 behind over three streets, the geometric size is 89% heads-up but only 72% three-way. Two-street sizes:
| SPR | Heads-up | 3-way | 4-way |
|---|---|---|---|
| 2 | 62% | 55% | 50% |
| 4 | 100% | 87% | 78% |
| 6 | 130% | 112% | 100% |
| 10 | 179% | 152% | 135% |
Before you plan to stack off multiway, check you are ahead of more than one range: the range equity calculator shows how fast your equity drops with each extra caller.
How many streets does your usual size take?
Bet the same % every street, starting at each SPR. The number is how many streets it takes to get all-in. Over 3.0 means you cannot get stacks in by the river with that size.
| Bet size | SPR 3 | SPR 6 | SPR 13 | SPR 20 |
|---|---|---|---|---|
| 33% | 3.8 | 5.0 | 6.5 | 7.3 |
| 50% | 2.8 | 3.7 | 4.8 | 5.4 |
| 67% | 2.3 | 3.0 | 3.9 | 4.4 |
| 75% | 2.1 | 2.8 | 3.6 | 4.1 |
| 100% | 1.8 | 2.3 | 3.0 | 3.4 |
| 150% | 1.4 | 1.9 | 2.4 | 2.7 |
When to bet geometric, and when not to
- Strong value hands on boards that will not change much. Sets, two pair and big draws that want the whole stack. Geometric sizing gets the most money in without scaring anyone with one giant bet.
- Your bluffs in the same line. If your value hands bet geometric, your semi-bluffs need to use the same sizes, or your sizing gives your hand away. The semi-bluff chart and bluff-to-value ratio show how many bluffs each size supports.
- Not for thin value or pot control. One pair that wants two streets of value, or a range bet on a dry flop, should use small sizes. See thin value betting and the c-bet chart.
- Watch what each size asks. Every bet sets your opponent’s minimum defense frequency and how often a bluff has to work. The MDF calculator and fold equity calculator go deeper; stack depth itself is in the SPR calculator.
FAQ
What is geometric bet sizing in poker?
Betting the same fraction of the pot on every street so that, if your opponent calls each time, the last bet is exactly all-in. With a $10 pot and $130 behind, three pot-sized bets do it: $10, $30, $90.
What is the geometric bet sizing formula?
Bet size as a fraction of the pot = ((1 + 2 × SPR)^(1/n) − 1) ÷ 2, where SPR is the effective stack divided by the pot and n is the number of streets left. Against more than one caller, replace 2 with (callers + 1).
Why use geometric sizing?
It is the most efficient way to get a whole stack in when you want to. Each bet is as small as it can be while still getting all-in by the river, so your opponent never faces one huge overbet, and you never end up with an awkward stub that is too big to bet and too small to fold.
When should I not use geometric sizing?
When you do not want to get stacks in. Thin value bets, small range bets on dry flops, pot control with medium hands and bluffs that should give up on bad turns all use smaller or different sizes. Geometric sizing is for strong, polarized lines: big value hands and the draws or bluffs that go with them.
How many streets should I plan for?
Count the streets you can still bet: three on the flop, two on the turn, one on the river. Planning for fewer streets means bigger bets. Many players plan for two streets on wet boards, where the turn can kill their action, and three on dry boards.
Does geometric sizing work multiway?
Yes, the bets just get smaller, because every caller grows the pot. In a 3-way pot each bet adds three times its size to the pot, so the formula divides by 3 instead of 2. The calculator handles up to four players in the pot.
What is a good SPR for stacking off?
With SPR around 1–2 one bet gets it in, at about 4 two pot-sized bets do it, and at 13 it takes three pot-sized bets. The chart above shows the exact geometric size for every SPR from 0.5 to 30.
Free email course
Free 5-day Controlled Chaos email course: one short lesson a day on aggressive, profitable low-stakes poker. No fluff.
